The plan doc records what was measured and why each decision fell where it
did: the private bridge is worse than unhardened (a live NAT bridge with
IPv6 on), incus-user blocks snapshots, no daemon-level template exists (read
in incus-user's source), widening survives re-sync (same source, then
measured live). box-design gains the access-tiers section — including why
narrowing to boxnet-only is the load-bearing decision and why the nft bridge
drop is the layer a restricted user cannot strip. RUNS.md logs MU-1..3.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
#71 — run as root, box installs once to /opt/box (world-readable) with a
/usr/local/bin shim, so every operator on a shared host has `box` on PATH
instead of `command not found`. Per-user ($HOME/.local) install is
byte-identical to before; BOX_HOME/BOX_BIN still override. A per-user tree
under /root is 0700 and unreadable to everyone else — the whole fleet got
`command not found` — so the root branch lands in a system location and
chmod -R a+rX's it, guarded on root. This is the path rig installs box through
(rig#24's `box` role).
#65 — `box tmux` runs `tmux new-session` inside the box, but the templates did
not install tmux, so it failed with `tmux: command not found`. tmux is now in
each template's cloud-init package list.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Implements the flow @danmt specified on #66. The installer now asks before it
acts, and never overwrites itself.
1. "Install box?" — prompted before anything is downloaded.
2. If box is already installed: say so and stop. A re-run changes nothing, so
curl|bash can no longer clobber a working tree or rebuild the host stack
under live boxes. Upgrading is explicit — uninstall, then install fresh.
3. On a fresh host: download, install, link onto PATH.
4. "Set up this machine as a box host now?" — a separate decision, because the
CLI and the host are not the same choice (you may host boxes elsewhere).
This replaces the version-diff refusal from the previous round with the simpler
rule Dan asked for: installed at all => no-op. It dissolves the same class of
"the upgrade ate my boxes" errors without the installer having to reason about
versions or enumerate boxes at all — you cannot lose boxes to an install that
refuses to touch an existing one.
Prompts read /dev/tty, because under curl|bash the script itself is stdin and a
plain read would eat the installer's own remaining lines. With no terminal
(CI, a pipe) BOX_YES=1 assumes yes and is required to proceed unattended;
without it we refuse rather than invent consent. BOX_SKIP_SETUP_HOST=1 declines
the second prompt.
The drill uninstalls before installing (the no-op rule would otherwise refuse
to re-lay the tree it re-proves each run) and sets BOX_YES=1 for the prompts;
BOX_FORCE_UPGRADE is gone with the refusal it drove.
Verified on a real host: cancel, fresh install, no-op re-run, and both prompts
driven through a pty (y/n and y-then-n), plus the no-tty refusal.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Found by running the drill on a real host, which I could not do before.
The unit is Type=oneshot with no RemainAfterExit, so systemd marks it
'inactive (dead)' the moment ExecStart succeeds. The rules are applied and the
box-to-box drop is live, and the unit still reads as though it died. That is
precisely the question people ask this unit: drill.sh's own failure hint sends
you to 'systemctl status box-firewall.service' to find out whether the firewall
came up, and today the honest answer and the alarming one look identical.
setup-host.sh already believed this was set — 'The unit is RemainAfterExit, so
once it has run it stays "active" forever' — and reasoned from it to explain why
it uses restart instead of 'enable --now'. The reasoning is right and the
restart is right; only the unit was missing the line the comment assumed.
Verified live: before, 'nft list table bridge box' showed the drop present while
is-active said inactive. After, is-active says active (exited) with the drop
still present, and restart still re-applies.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Per @danmt on #66: hatch first, the version-aware migration as its own issue.
Building the host stack from the installer means an upgrade is no longer a tree
swap — it reaches under every box attached to that stack. So the installer now
declines to guess. Same version and ref: it says so and changes nothing.
Version or ref change with boxes on the host: it refuses, lists them, and does
so BEFORE $DEST is touched, so a refusal leaves the working install intact. No
boxes: nothing to lose, proceed. BOX_FORCE_UPGRADE=1 overrides, and the drill
sets it, because arriving on a dirty host and wiping it is the drill's job.
Ref, not just VERSION: a branch and main carry the same VERSION string, so
VERSION alone would call an install of this very branch "unchanged" and skip the
hatch. Both tag generations count as boxes — a pre-rename user.claudebox=1 box
is just as much someone's work as a current one.
The box query runs unprivileged first and escalates only if the socket refuses:
anyone who owns boxes is already in incus-admin, and an installer should not
demand a sudo password merely to look.
The error deliberately does not suggest snapshot -> rm -> restore --from: 'box
rm' deletes a box AND every snapshot it has, so that path loses the data at the
rm. It says to copy anything needed out of the box first. Raised on #67.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Review found two real problems, both confirmed by reproducing them.
setup-host hardcoded 'sudo' for every privileged call, so install.sh's
deliberate root branch — the one that proceeds when id -u is 0 even with no
sudo installed — handed off to a script that died on 'sudo: command not found'
before doing anything (exit 127, reproduced with env -i and a minimal PATH).
The root path was nominal, not real. Privilege is now resolved once: nothing at
UID 0, sudo otherwise, a clear error if neither is possible.
Two things fell out of that. Root does not need incus-admin at all (UID 0 opens
the socket regardless), so adding root to the group was a no-op that also missed
the human — under 'sudo install.sh' that is SUDO_USER, who is now the one
granted the group. And apt must not hang: install.sh runs setup-host with nobody
watching, while a fresh cloud image holds the dpkg lock in apt-daily for its
first minutes, so the calls are now bounded and non-interactive.
The drill did not exercise any of this. It ran setup-host immediately after
install.sh, so the stack existed by the drill's own hand and a run passed
identically whether or not install.sh had done a thing — a fresh run converged
three times while its messages still described the pre-#63 "first pass may only
add you to the group" behaviour. It now asserts the post-install stack in-group,
before the clean or anything else mutates the host, which is the assertion that
actually proves #64. setup-host then runs exactly once more, after the clean —
that one is load-bearing, since the clean deliberately unsets dns.mode and
something has to converge it back. DRILL_OWNS_SETUP=1 hands sequencing back to
the drill. Pre-setup tripwires now read before install.sh, because install.sh is
what triggers setup now; read afterwards they said nothing.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
box setup-host stopped halfway when it had to add you to incus-admin: it
usermod'd, printed a NOTE telling you to re-login and re-run, and exited 0 —
a success-shaped no-op with no boxnet, no ACL, no box-net profile and no
firewall behind it. It now re-execs itself under 'sg incus-admin' and
finishes in that same invocation.
The membership check was also asking the wrong question. 'id -nG "$USER"'
names a user, so it reads the group database — which lists incus-admin the
instant usermod returns, while the shell's own credentials still lack it
(supplementary groups are fixed at login). A same-session re-run therefore
passed the check and died further down on a bare permission error from incus
that mentioned neither the group nor the re-login. Argless 'id -nG' asks the
process what it actually holds, which is what incus checks when it opens
/var/lib/incus/unix.socket.
With one run now sufficient, install.sh runs the setup itself instead of
printing a warning and leaving the user a command: the install reported
success and 'box new' then failed on a host with no Incus. setup-host is
idempotent, so doing this on every install is also how an upgraded host picks
up stack changes. BOX_SKIP_SETUP_HOST=1 opts out, and a failed setup leaves
the install standing and says what to re-run.
Fixes#63Fixes#64
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A bare host got two DIRTYs (the box-to-box drop 'MISSING', the host's
Tailscale resolver) and a 'NOT fit to mint (or to drill)' verdict — and
the very next drill run went 84/84 green from that exact state. Missing
from a stack and never set up are different findings: the network,
profile and ACL sections already knew this; the firewall and resolver
sections now do too. FRESH (no boxnet) downgrades both to information —
the VPN resolver is still named, as a fact about the host that setup-host
pins around, not a fault in a stack that does not exist. The clean
verdict on a fresh host now says what to actually do: run setup-host, or
the drill, which sets the host up itself.
Verified both paths live: standing stack → 'clean', post-teardown →
'fresh' with no DIRTYs.
Also: the measured drill count is 84 (README said 83 — the box-info
exposure check was a NOTE when last counted and is a PASS now).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
One entry for now — 0.5.0 as merged plus the inline resource flags that
fold into it. Pre-0.5.0 history stays in git and drill/RUNS.md, which
this points at.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
