heavy-duty/rig
7
0
Fork 1
Code Issues 10 Pull requests Projects Releases 3 Packages Wiki Activity Actions
rig/test/cli.sh
claude-hdb d4ab362964 fix(runner): install refuses a box registered to another repo 
`rig runner install --repo <B>` on a box already registered to repo A
treated the mere existence of .runner as "already registered", skipped
configure, restarted the service still pointed at A, and reported success.
--repo was accepted, validated, and then ignored — leaving B with zero
runners and its `runs-on` jobs queued against one that will never come.

This is the natural next command after a partial `repoint`, and the failure
is worse than a no-op: moving a runner between repos is a trust-boundary
act, so quietly putting it back on the old one defeats the point of the move.

Gate install on the repo .runner actually names. Convergence — the property
worth keeping — is untouched: re-running against the repo the box is already
on still skips registration, never prompts for a token, and exits 0.
Skipping when the repo *differs* was never convergence, only a silently
ignored argument, so it now fails and names both repos, pointing at
`runner repoint` (move) or `runner remove` (start over). An unreadable
.runner is refused too — it is no licence to assume a match.

The .runner reader that `status` and `repoint` each carried is lifted into
commands/lib/runner-config.sh, which now also holds the guard. Its json_field
no longer dies bare under `set -o pipefail` when a key is missing, which is
what `status`'s own ${REPO_URL:-unknown} fallback always assumed.

Tests: the guard is exercised against a fixture .runner (refuses another repo
naming both, points at repoint, no-ops on the same repo, passes an
unregistered box, refuses an unreadable one) plus an ordering assertion that
it precedes svc.sh start — reaching it through the CLI would need root and a
really-registered runner, which the dependency-free harness cannot fabricate.
All three mutants (guard deleted, guard comparing nothing, guard moved below
the service start) go red.

Closes #13
2026-07-13 14:57:28 +00:00

182 lines
11 KiB
Bash
Raw Blame History

#!/usr/bin/env bash
# Dependency-free CLI assertions. Run: bash test/cli.sh
# Deliberately no `set -e` — the harness asserts on failing commands.
set -u
ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
PASS=0 FAIL=0
# check <desc> <want_exit> <want_substr> <cmd...>
# Runs cmd, asserts exit code and (if non-empty) that combined output
# contains want_substr.
check() {
local desc="$1" want="$2" substr="$3"; shift 3
local out rc
out="$("$@" 2>&1)"; rc=$?
if [ "$rc" -ne "$want" ]; then
echo "FAIL: $desc — exit $rc, wanted $want"
printf '%s\n' "$out" | sed 's/^/ /'
FAIL=$((FAIL + 1)); return
fi
if [ -n "$substr" ] && ! printf '%s' "$out" | grep -qF -e "$substr"; then
echo "FAIL: $desc — output missing '$substr'"
printf '%s\n' "$out" | sed 's/^/ /'
FAIL=$((FAIL + 1)); return
fi
echo "ok: $desc"; PASS=$((PASS + 1))
}
check "no args shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig"
check "--help exits 0" 0 "usage:" "$ROOT/bin/rig" --help
check "help exits 0" 0 "usage:" "$ROOT/bin/rig" help
check "unknown command exits 2" 2 "unknown command" "$ROOT/bin/rig" frobnicate
check "bare coolify shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" coolify
check "bootstrap: role required, exit 2" 2 "role required" "$ROOT/commands/bootstrap.sh"
check "bootstrap: --help exits 0" 0 "usage:" "$ROOT/commands/bootstrap.sh" --help
check "bootstrap: unknown role exits 2" 2 "unknown role" "$ROOT/commands/bootstrap.sh" potato
check "bootstrap: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/bootstrap.sh" workload --nope
check "bootstrap: hostname needs value" 2 "needs a value" "$ROOT/commands/bootstrap.sh" workload --hostname
check "bootstrap: runner refuses tag:server" 2 "must not advertise tag:server" "$ROOT/commands/bootstrap.sh" runner --ts-tag tag:server
if [ "$(id -u)" -ne 0 ]; then
check "bootstrap: refuses non-root" 1 "must run as root" env TS_AUTHKEY=x "$ROOT/commands/bootstrap.sh" workload
check "bootstrap: runner role parses, refuses non-root" 1 "must run as root" env TS_AUTHKEY=x "$ROOT/commands/bootstrap.sh" runner
else
echo "skip: bootstrap non-root refusals (running as root)"
fi
check "coolify: version required, exit 2" 2 "--version" "$ROOT/commands/coolify-install.sh"
check "coolify: --help exits 0" 0 "usage:" "$ROOT/commands/coolify-install.sh" --help
check "coolify: version needs value" 2 "needs a value" "$ROOT/commands/coolify-install.sh" --version
check "coolify: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/coolify-install.sh" --nope
if [ "$(id -u)" -ne 0 ]; then
check "coolify: refuses non-root" 1 "must run as root" "$ROOT/commands/coolify-install.sh" --version 4.1.2
else
echo "skip: coolify non-root refusal (running as root)"
fi
check "bare coolify backup shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" coolify backup
check "coolify backup: bad subcommand exits 2" 2 "usage:" "$ROOT/bin/rig" coolify backup frobnicate
check "coolify backup: --help exits 0" 0 "usage:" "$ROOT/commands/coolify-backup-install.sh" --help
check "coolify backup: schedule needs value" 2 "needs a value" "$ROOT/commands/coolify-backup-install.sh" --schedule
check "coolify backup: pg-container needs value" 2 "needs a value" "$ROOT/commands/coolify-backup-install.sh" --pg-container
check "coolify backup: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/coolify-backup-install.sh" --nope
if [ "$(id -u)" -ne 0 ]; then
check "coolify backup: refuses non-root" 1 "must run as root" "$ROOT/commands/coolify-backup-install.sh"
else
echo "skip: coolify backup non-root refusal (running as root)"
fi
check "bare runner shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" runner
check "runner: --help exits 0" 0 "usage:" "$ROOT/commands/runner-install.sh" --help
check "runner: repo required, exit 2" 2 "--repo" "$ROOT/commands/runner-install.sh" --version 2.335.1
check "runner: version needs value" 2 "needs a value" "$ROOT/commands/runner-install.sh" --repo acme/widgets --version
check "runner: repo needs value" 2 "needs a value" "$ROOT/commands/runner-install.sh" --repo
check "runner: rejects bad repo slug" 2 "owner/repo" "$ROOT/commands/runner-install.sh" --repo not-a-slug --version 2.335.1
check "runner: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-install.sh" --repo acme/widgets --version 2.335.1 --user root
check "runner: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-install.sh" --nope
if [ "$(id -u)" -ne 0 ]; then
check "runner: refuses non-root" 1 "must run as root" env RUNNER_TOKEN=x "$ROOT/commands/runner-install.sh" --repo acme/widgets --version 2.335.1
else
echo "skip: runner non-root refusal (running as root)"
fi
check "runner: bad subcommand exits 2" 2 "usage:" "$ROOT/bin/rig" runner frobnicate
# --- runner install: --repo must agree with what the box is already on -------
# The bug: `install --repo B` on a box registered to repo A skipped configure,
# restarted the service on A, and reported success — --repo accepted, validated,
# then ignored. The guard is exercised here through the shared lib, against a
# fixture .runner: reaching it via the CLI needs root AND a really-registered
# runner, neither of which this harness can fabricate.
guard() { # guard <runner_dir> <owner/repo>
bash -c 'set -euo pipefail
. "$1/commands/lib/runner-config.sh"
assert_runner_repo "$2" "$3"' _ "$ROOT" "$1" "$2"
}
REG_DIR="$(mktemp -d)" # a box registered to acme/alpha
EMPTY_DIR="$(mktemp -d)" # a box with no runner at all
printf '%s\n' '{"agentId":7,"agentName":"ci-box","gitHubUrl":"https://github.com/acme/alpha","workFolder":"_work"}' \
> "$REG_DIR/.runner"
check "runner install: refuses a repo the box is not registered to" \
1 "already registered to https://github.com/acme/alpha" guard "$REG_DIR" acme/beta
check "runner install: the refusal names the repo that was asked for" \
1 "not https://github.com/acme/beta" guard "$REG_DIR" acme/beta
check "runner install: the refusal points at repoint" \
1 "rig runner repoint --repo acme/beta" guard "$REG_DIR" acme/beta
# Convergence is the property worth keeping: same repo stays a clean no-op.
check "runner install: the repo it is already on is a no-op" \
0 "" guard "$REG_DIR" acme/alpha
check "runner install: an unregistered box passes the guard" \
0 "" guard "$EMPTY_DIR" acme/beta
# A .runner rig cannot read is not a licence to assume it matches.
printf '%s\n' '{"agentName":"ci-box"}' > "$REG_DIR/.runner"
check "runner install: refuses an unreadable registration" \
1 "names no repository" guard "$REG_DIR" acme/alpha
rm -rf "$REG_DIR" "$EMPTY_DIR"
# The guard is only worth something if it runs BEFORE the box is touched: the
# token prompt, the download, configure and svc.sh start all come after it.
# Ordering is the whole fix, so assert it rather than trust it.
# Matches the CALL, not the word: the comment above it mentions assert_runner_repo
# too, and a plain grep would keep finding that after the call itself was deleted.
# The defaults fail closed, so a guard that is gone cannot read as one that merely
# sits early in the file.
guard_at="$(grep -nE '^[[:space:]]*assert_runner_repo ' "$ROOT/commands/runner-install.sh" | head -n1 | cut -d: -f1)"
start_at="$(grep -n 'svc.sh start' "$ROOT/commands/runner-install.sh" | head -n1 | cut -d: -f1)"
check "runner install: the repo guard precedes svc.sh start" \
0 "" test "${guard_at:-999999}" -lt "${start_at:-0}"
check "runner status: --help exits 0" 0 "usage:" "$ROOT/commands/runner-status.sh" --help
check "runner status: user needs value" 2 "needs a value" "$ROOT/commands/runner-status.sh" --user
check "runner status: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-status.sh" --user root
check "runner status: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-status.sh" --nope
check "runner remove: --help exits 0" 0 "usage:" "$ROOT/commands/runner-remove.sh" --help
check "runner remove: user needs value" 2 "needs a value" "$ROOT/commands/runner-remove.sh" --user
check "runner remove: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-remove.sh" --user root
check "runner remove: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-remove.sh" --nope
check "runner repoint: --help exits 0" 0 "usage:" "$ROOT/commands/runner-repoint.sh" --help
check "runner repoint: repo required" 2 "--repo" "$ROOT/commands/runner-repoint.sh"
check "runner repoint: repo needs value" 2 "needs a value" "$ROOT/commands/runner-repoint.sh" --repo
check "runner repoint: rejects bad slug" 2 "owner/repo" "$ROOT/commands/runner-repoint.sh" --repo not-a-slug
check "runner repoint: labels need value" 2 "needs a value" "$ROOT/commands/runner-repoint.sh" --repo acme/widgets --labels
check "runner repoint: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-repoint.sh" --repo acme/widgets --user root
check "runner repoint: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-repoint.sh" --nope
if [ "$(id -u)" -ne 0 ]; then
check "runner status: refuses non-root" 1 "must run as root" "$ROOT/commands/runner-status.sh"
check "runner remove: refuses non-root" 1 "must run as root" \
env RUNNER_REMOVE_TOKEN=x "$ROOT/commands/runner-remove.sh"
# --local too: the token-free path must still not be runnable by the runner user.
check "runner remove: --local refuses non-root" 1 "must run as root" \
"$ROOT/commands/runner-remove.sh" --local
check "runner repoint: refuses non-root" 1 "must run as root" \
env RUNNER_REMOVE_TOKEN=x RUNNER_TOKEN=y "$ROOT/commands/runner-repoint.sh" --repo acme/widgets
else
echo "skip: runner status/remove/repoint non-root refusals (running as root)"
fi
# The dump script ships to control-plane boxes as an embedded heredoc. A syntax
# error in it would be invisible here and would first surface at 04:00 on a live
# control plane. Extract it and syntax-check what actually gets written.
DUMP_TMP="$(mktemp)"
sed -n "/<<'DUMP_SCRIPT'/,/^DUMP_SCRIPT\$/p" "$ROOT/commands/coolify-backup-install.sh" \
| sed '1d;$d' > "$DUMP_TMP"
check "embedded dump script extracted (guards the sed above)" 0 "" grep -q "pg_dump" "$DUMP_TMP"
check "embedded dump script is valid bash" 0 "" bash -n "$DUMP_TMP"
check "embedded dump script rejects a bare bucket name" 1 "must be an s3:// URI" \
env AGE_RECIPIENT=age1x S3_BUCKET=my-bucket S3_ENDPOINT=https://s3.example.com bash "$DUMP_TMP"
check "embedded dump script rejects a schemeless endpoint" 1 "needs a scheme" \
env AGE_RECIPIENT=age1x S3_BUCKET=s3://b/k S3_ENDPOINT=s3.example.com bash "$DUMP_TMP"
rm -f "$DUMP_TMP"
# Regression: /etc/os-release defines VERSION (e.g. "13 (trixie)" on Debian);
# sourcing it in the main shell clobbers a script's $VERSION and splices the
# OS string into download URLs. It must only ever be sourced in a subshell.
check "no main-shell os-release sourcing" 1 "" \
grep -rnE '^[[:space:]]*\.[[:space:]]+/etc/os-release' "$ROOT/commands"
echo "---"
echo "$PASS passed, $FAIL failed"
[ "$FAIL" -eq 0 ]
Reference in a new issue View git blame Copy permalink