claude-hdb
fcee110183
runner install is convergent by skipping: it sees a registered runner and leaves it alone. So rig could create a runner and never move or destroy one, and re-pointing a box at a different repo meant hand-rolled config.sh/svc.sh incantations against an install layout only rig knew about. - status: repo, name, labels, dir, unit — read-only, no token, no network. - remove: service down, then deregister. --local wipes the box without contacting GitHub, leaving a stale entry to delete by hand. - repoint: remove + re-register in one act, keeping the runner's name and reusing the binary already on the box. The service always comes down before deregistration in both paths: GitHub's removal throws "Uninstall service first" while the service is configured, and --local bypasses that check entirely, which would strand a running service pointed at deleted config. repoint collects both tokens up front — a token you turn out not to have must fail while the runner is still registered, not halfway through the move. Labels are the sharp edge: GitHub holds them, the runner does not persist them, and they are what runs-on matches. install now records what it registered with so repoint and status can read it back; a runner installed before that has nothing to read, so repoint falls back to the ci-runner default and warns before it touches anything.
137 lines
8.6 KiB
Bash
137 lines
8.6 KiB
Bash
#!/usr/bin/env bash
|
|
# Dependency-free CLI assertions. Run: bash test/cli.sh
|
|
# Deliberately no `set -e` — the harness asserts on failing commands.
|
|
set -u
|
|
ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
|
|
PASS=0 FAIL=0
|
|
|
|
# check <desc> <want_exit> <want_substr> <cmd...>
|
|
# Runs cmd, asserts exit code and (if non-empty) that combined output
|
|
# contains want_substr.
|
|
check() {
|
|
local desc="$1" want="$2" substr="$3"; shift 3
|
|
local out rc
|
|
out="$("$@" 2>&1)"; rc=$?
|
|
if [ "$rc" -ne "$want" ]; then
|
|
echo "FAIL: $desc — exit $rc, wanted $want"
|
|
printf '%s\n' "$out" | sed 's/^/ /'
|
|
FAIL=$((FAIL + 1)); return
|
|
fi
|
|
if [ -n "$substr" ] && ! printf '%s' "$out" | grep -qF -e "$substr"; then
|
|
echo "FAIL: $desc — output missing '$substr'"
|
|
printf '%s\n' "$out" | sed 's/^/ /'
|
|
FAIL=$((FAIL + 1)); return
|
|
fi
|
|
echo "ok: $desc"; PASS=$((PASS + 1))
|
|
}
|
|
|
|
check "no args shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig"
|
|
check "--help exits 0" 0 "usage:" "$ROOT/bin/rig" --help
|
|
check "help exits 0" 0 "usage:" "$ROOT/bin/rig" help
|
|
check "unknown command exits 2" 2 "unknown command" "$ROOT/bin/rig" frobnicate
|
|
check "bare coolify shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" coolify
|
|
|
|
check "bootstrap: role required, exit 2" 2 "role required" "$ROOT/commands/bootstrap.sh"
|
|
check "bootstrap: --help exits 0" 0 "usage:" "$ROOT/commands/bootstrap.sh" --help
|
|
check "bootstrap: unknown role exits 2" 2 "unknown role" "$ROOT/commands/bootstrap.sh" potato
|
|
check "bootstrap: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/bootstrap.sh" workload --nope
|
|
check "bootstrap: hostname needs value" 2 "needs a value" "$ROOT/commands/bootstrap.sh" workload --hostname
|
|
check "bootstrap: runner refuses tag:server" 2 "must not advertise tag:server" "$ROOT/commands/bootstrap.sh" runner --ts-tag tag:server
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
check "bootstrap: refuses non-root" 1 "must run as root" env TS_AUTHKEY=x "$ROOT/commands/bootstrap.sh" workload
|
|
check "bootstrap: runner role parses, refuses non-root" 1 "must run as root" env TS_AUTHKEY=x "$ROOT/commands/bootstrap.sh" runner
|
|
else
|
|
echo "skip: bootstrap non-root refusals (running as root)"
|
|
fi
|
|
|
|
check "coolify: version required, exit 2" 2 "--version" "$ROOT/commands/coolify-install.sh"
|
|
check "coolify: --help exits 0" 0 "usage:" "$ROOT/commands/coolify-install.sh" --help
|
|
check "coolify: version needs value" 2 "needs a value" "$ROOT/commands/coolify-install.sh" --version
|
|
check "coolify: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/coolify-install.sh" --nope
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
check "coolify: refuses non-root" 1 "must run as root" "$ROOT/commands/coolify-install.sh" --version 4.1.2
|
|
else
|
|
echo "skip: coolify non-root refusal (running as root)"
|
|
fi
|
|
|
|
check "bare coolify backup shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" coolify backup
|
|
check "coolify backup: bad subcommand exits 2" 2 "usage:" "$ROOT/bin/rig" coolify backup frobnicate
|
|
check "coolify backup: --help exits 0" 0 "usage:" "$ROOT/commands/coolify-backup-install.sh" --help
|
|
check "coolify backup: schedule needs value" 2 "needs a value" "$ROOT/commands/coolify-backup-install.sh" --schedule
|
|
check "coolify backup: pg-container needs value" 2 "needs a value" "$ROOT/commands/coolify-backup-install.sh" --pg-container
|
|
check "coolify backup: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/coolify-backup-install.sh" --nope
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
check "coolify backup: refuses non-root" 1 "must run as root" "$ROOT/commands/coolify-backup-install.sh"
|
|
else
|
|
echo "skip: coolify backup non-root refusal (running as root)"
|
|
fi
|
|
|
|
check "bare runner shows usage, exit 2" 2 "usage:" "$ROOT/bin/rig" runner
|
|
check "runner: --help exits 0" 0 "usage:" "$ROOT/commands/runner-install.sh" --help
|
|
check "runner: repo required, exit 2" 2 "--repo" "$ROOT/commands/runner-install.sh" --version 2.335.1
|
|
check "runner: version needs value" 2 "needs a value" "$ROOT/commands/runner-install.sh" --repo acme/widgets --version
|
|
check "runner: repo needs value" 2 "needs a value" "$ROOT/commands/runner-install.sh" --repo
|
|
check "runner: rejects bad repo slug" 2 "owner/repo" "$ROOT/commands/runner-install.sh" --repo not-a-slug --version 2.335.1
|
|
check "runner: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-install.sh" --repo acme/widgets --version 2.335.1 --user root
|
|
check "runner: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-install.sh" --nope
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
check "runner: refuses non-root" 1 "must run as root" env RUNNER_TOKEN=x "$ROOT/commands/runner-install.sh" --repo acme/widgets --version 2.335.1
|
|
else
|
|
echo "skip: runner non-root refusal (running as root)"
|
|
fi
|
|
|
|
check "runner: bad subcommand exits 2" 2 "usage:" "$ROOT/bin/rig" runner frobnicate
|
|
|
|
check "runner status: --help exits 0" 0 "usage:" "$ROOT/commands/runner-status.sh" --help
|
|
check "runner status: user needs value" 2 "needs a value" "$ROOT/commands/runner-status.sh" --user
|
|
check "runner status: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-status.sh" --user root
|
|
check "runner status: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-status.sh" --nope
|
|
|
|
check "runner remove: --help exits 0" 0 "usage:" "$ROOT/commands/runner-remove.sh" --help
|
|
check "runner remove: user needs value" 2 "needs a value" "$ROOT/commands/runner-remove.sh" --user
|
|
check "runner remove: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-remove.sh" --user root
|
|
check "runner remove: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-remove.sh" --nope
|
|
|
|
check "runner repoint: --help exits 0" 0 "usage:" "$ROOT/commands/runner-repoint.sh" --help
|
|
check "runner repoint: repo required" 2 "--repo" "$ROOT/commands/runner-repoint.sh"
|
|
check "runner repoint: repo needs value" 2 "needs a value" "$ROOT/commands/runner-repoint.sh" --repo
|
|
check "runner repoint: rejects bad slug" 2 "owner/repo" "$ROOT/commands/runner-repoint.sh" --repo not-a-slug
|
|
check "runner repoint: labels need value" 2 "needs a value" "$ROOT/commands/runner-repoint.sh" --repo acme/widgets --labels
|
|
check "runner repoint: refuses --user root" 2 "must not be root" "$ROOT/commands/runner-repoint.sh" --repo acme/widgets --user root
|
|
check "runner repoint: unknown flag exits 2" 2 "unknown flag" "$ROOT/commands/runner-repoint.sh" --nope
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
check "runner status: refuses non-root" 1 "must run as root" "$ROOT/commands/runner-status.sh"
|
|
check "runner remove: refuses non-root" 1 "must run as root" \
|
|
env RUNNER_REMOVE_TOKEN=x "$ROOT/commands/runner-remove.sh"
|
|
# --local too: the token-free path must still not be runnable by the runner user.
|
|
check "runner remove: --local refuses non-root" 1 "must run as root" \
|
|
"$ROOT/commands/runner-remove.sh" --local
|
|
check "runner repoint: refuses non-root" 1 "must run as root" \
|
|
env RUNNER_REMOVE_TOKEN=x RUNNER_TOKEN=y "$ROOT/commands/runner-repoint.sh" --repo acme/widgets
|
|
else
|
|
echo "skip: runner status/remove/repoint non-root refusals (running as root)"
|
|
fi
|
|
|
|
# The dump script ships to control-plane boxes as an embedded heredoc. A syntax
|
|
# error in it would be invisible here and would first surface at 04:00 on a live
|
|
# control plane. Extract it and syntax-check what actually gets written.
|
|
DUMP_TMP="$(mktemp)"
|
|
sed -n "/<<'DUMP_SCRIPT'/,/^DUMP_SCRIPT\$/p" "$ROOT/commands/coolify-backup-install.sh" \
|
|
| sed '1d;$d' > "$DUMP_TMP"
|
|
check "embedded dump script extracted (guards the sed above)" 0 "" grep -q "pg_dump" "$DUMP_TMP"
|
|
check "embedded dump script is valid bash" 0 "" bash -n "$DUMP_TMP"
|
|
check "embedded dump script rejects a bare bucket name" 1 "must be an s3:// URI" \
|
|
env AGE_RECIPIENT=age1x S3_BUCKET=my-bucket S3_ENDPOINT=https://s3.example.com bash "$DUMP_TMP"
|
|
check "embedded dump script rejects a schemeless endpoint" 1 "needs a scheme" \
|
|
env AGE_RECIPIENT=age1x S3_BUCKET=s3://b/k S3_ENDPOINT=s3.example.com bash "$DUMP_TMP"
|
|
rm -f "$DUMP_TMP"
|
|
|
|
# Regression: /etc/os-release defines VERSION (e.g. "13 (trixie)" on Debian);
|
|
# sourcing it in the main shell clobbers a script's $VERSION and splices the
|
|
# OS string into download URLs. It must only ever be sourced in a subshell.
|
|
check "no main-shell os-release sourcing" 1 "" \
|
|
grep -rnE '^[[:space:]]*\.[[:space:]]+/etc/os-release' "$ROOT/commands"
|
|
|
|
echo "---"
|
|
echo "$PASS passed, $FAIL failed"
|
|
[ "$FAIL" -eq 0 ]
|